PennMustangs

ram 1529 0 balance SFI billet steel flywheel

flysti06 — Tue, 21 May 2013 04:25:47 GMT

ram SFI billet steel internally balanced flywheel for small block ford,
asking 150 or make an offer

94/95 import fold in mirrors

77CobraII — Mon, 20 May 2013 04:15:13 GMT

I have a set of fold in mirrors that were on a 94 import GT. The car was from the Phillippines

Powder Coat Nitrous/Fuel Solenoids?

racerxmd — Sun, 19 May 2013 21:57:19 GMT

I want to Powder Coat my Nitrous and Fuel Solenoids. One of Troy's friends (Marc) took apart my solenoids to make sure they were still O.K. All is good, but the time they were in the on the car outside has taken its toll on the finish of the cups. Maybe Todd could Powder Coat the Nitrous one with that Candy Blue that he did on some parts for me already. And would like to see maybe a Candy Red for the Fuel solenoid. Is this possible? I have only one pic of the Nitrous and two of the Fuel solenoids. Here they are for you to see:

Here is the kit I have I believe from Nitrous Supply:

Think I might order the bracket too:

6 17x9 Halibrand Cobra III Wheels

tORMENtOR — Sun, 19 May 2013 16:26:25 GMT

Selling my Halibrands,4 are Chrome non deep dish in original boxes mint condition. 2 are non deep dish gray,some marks on polished area. Brand New lugnuts included $900OBO for all 6 or will work a trade for Corbeau A4's in Black with seat tracks or 05-09 Charcoal Bullit wheels with tires.

F/S: M/T Drag Radials 275x60x15s

racerxmd — Sun, 19 May 2013 13:06:33 GMT

I have for sale a set of the M/T Drag Radials 275x60x15s off my MDMonster project. These tires are a couple years old, but have Never been driven on! They even still have the factory labels on them! There is some Very Minor cracking on the tires that I was told will be removed once 1st burn out is done. I will accept payment via PayPal and buyer pays the Fees or $$$$ is always good. Tires are located in Denver,PA with the car. I am selling cause I went with a Bigger tire or else I would keep them. Price = $300.00 local pick up or buyer pays additional shipping charges. Here are a couple of pics I took of them:

F/S: Saleen Style Wing

racerxmd — Sun, 19 May 2013 04:04:11 GMT

I have for sale a good used Saleen Style Wing for a hatchback Foxbody off my '86 GT. I no longer need this. Wing is here in Maryland (20850). I will accept payment via PayPal plus buyer pays Fees. Price = $100.00 plus shipping.

F/S; Aeromotive Billet Fuel Controller

racerxmd — Sun, 19 May 2013 03:59:11 GMT

I have for sale a good used Aeromotive Billet Fuel Controller. I no longer need this with my new fuel system. Part is here in Maryland ( 20850 ). I will accept payment via PayPal plus buyer pays PayPal Fees. Price = $150.00 shipped

9redfox3 a++

RsStang — Sun, 19 May 2013 01:56:29 GMT

Even though we **** talk rich and bust his chops Rich is a real nice guy and a stand up fella. I was down Pat and Erich's garage today dropping some parts off for another good dude and rich was having some work done by pat. Rich just gave me his old parts free of charge. I even told him I would sell the parts and give him the cash and he said no. Rich your a good dude and I'd have no problem doing business with you. Maybe a garage roof when I decide to build or maybe you guys can redo mine. Anyway if your ever gonna deal with rich he's a good fella

Yellow Bear racing 2k13

Fox Body aluminum radiator and Black Magic Fan $200

td91gt — Sun, 19 May 2013 00:23:39 GMT

I have a summit direct fit Fox body Mustang radiator with a black magic fan. This rad does not have the plastic side tanks like the motorsport rad it is a nice piece. Reason for sale is parting out car. The rad is probably 4 years old or so been in a race car its entire life. The black magic fan does NOT have the themostat I used it with a switch. Looking for $200 for the pair. Located in easton pa 18042

Comp and trick flow stuff

nitromonkey — Sat, 18 May 2013 22:05:34 GMT

Had to make corrections in my valve train geometry so I'm pass'n these things on. All pieces were installed accept poly locks. motor was never fired so nothing has seen any strain and everything is in perfect condition.

1- set of comp rocker studs 7/16 top and bottom, 1.750 stud length w/guide plates $40

2- new in bag comp 7/16 hi-tech poly locks $25

3- Trick flow 5/16 chromoly push rods 6.45 length .080 wall $90

Attached Images

	DSC00402.jpg (392.3 KB)
	DSC00411.jpg (355.4 KB)
	DSC00413.jpg (427.8 KB)
	DSC00405.jpg (227.4 KB)

Burping the Cobra

Skitzerman — Sat, 18 May 2013 19:04:22 GMT

I'm sure there are many other ways to do this. This setup works for me because there is no mess and it evacuates all the air from the cooling system. Two heat cycles and its done.

Need help with getting rid of AC and smog

skip — Sat, 18 May 2013 03:34:38 GMT

I had a guy ask me about what he needs to move the power steering up on a fox body. He wants to get rid of the ac and smog pump. He was going to get a smog delete pulley and an AC delete pulley. I thought there was an easier and cheaper way. I know there is put couldn't remember what you do again. This is for the 302 motor. So what have you done or how do you do it for cheap or easy?

WTB: OR X pipe 99-04 GT

Red Fox — Sat, 18 May 2013 03:01:53 GMT

Near Reading PA please

Also looking for 40 series Flowmasters (not super 40)

NASCAR driver **** Trickle dies....

9redfox3 — Fri, 17 May 2013 11:11:49 GMT

http://www.cnn.com/2013/05/16/sport/...html?hpt=hp_c2

I remember watching him race it's too bad his life ended this way ... RIP !

Best way to 500HP

KLJ777 — Fri, 17 May 2013 01:36:14 GMT

OK,

I may have a few dollars to spend (OK .not alot) but need to keep it under the wife's radar.
So I have cams , CAI, and exhaust.
Any ideas other than the blower upgrade? I am not confident I could do that on my own.

Thoughts ??

:thanks: