UPR Maximum Bump Steer kit Missing Nuts?

racerxmd · 08-01-2012, 07:07 PM

Just noticed that my UPR Maximum Bump Steer kit only comes with one set (2) locking nuts. Don't I need another set so I can lock both ends of the adjusting sleeves? Where can I can the nuts from? Are they both regular threads or is one reversed? Thanks

Skitzerman · 08-01-2012, 07:39 PM

I would just call UPR and ask them to send you the missing nuts. Most places are good about that kind of stuff.

Shifter · 08-01-2012, 08:20 PM

Auto parts store will have them

frankcobra · 08-02-2012, 11:07 AM

You only need too nuts.
This post may help.
http://www.ffcars.com/forums/21-ffr-...ement-how.html

08-01-2012, 07:07 PM	#1
racerxmd Senior Member Join Date: Jul 2006 Location: 20850 Posts: 919 Credits: 14,681	UPR Maximum Bump Steer kit Missing Nuts? Just noticed that my UPR Maximum Bump Steer kit only comes with one set (2) locking nuts. Don't I need another set so I can lock both ends of the adjusting sleeves? Where can I can the nuts from? Are they both regular threads or is one reversed? Thanks

08-01-2012, 07:39 PM	#2
Skitzerman Name: Vince Join Date: Jun 2006 Location: NE Philly Posts: 609 '10 FORD RANGER '04 FORD MUSTANG - SVT COBRA Total Awards: 1 Total Points: 0 Credits: 11,139	I would just call UPR and ask them to send you the missing nuts. Most places are good about that kind of stuff. __________________ 2007 November's Car of the Month 2009 Philly Stang of the Year Proud American, 37 years of dedicated service for the United States Navy. Getting older, the fine print may be harder to see but I see everything else, clearly. \|SCT\|BilletFlow\|Stiegemeier\|LFP\|NGK\|C&L\|JLT\|Fore\|FRPP\|Baer\|MagnaFlow\|Mac\|Pypes\|MGW\|UPR\|AeroForce\|AutoMeter\|LethalPerf\|FTBR\|Taylor\|EvenFlow\|MM\|BBK\|MT\|MRT\|AM\|Walbro\|

08-01-2012, 08:20 PM	#3
Shifter Senior Member Name: Lou Join Date: Oct 2006 Location: Pocono's Posts: 3,340 '84 FORD MUSTANG - GT Total Awards: 2 Total Points: 0 Credits: 36,832	Auto parts store will have them __________________ 1984 GT - 363/c4, street legal-pump gas 1996 Mystic Cobra

08-02-2012, 11:07 AM	#4
frankcobra Member Name: Frank Join Date: May 2009 Location: Laurel Run Posts: 159 Credits: 6,989	You only need too nuts. This post may help. http://www.ffcars.com/forums/21-ffr-...ement-how.html __________________ 302 E-CAM X303 FMR HEADS 70mm with Cobra intake,T5, 3.55 GEARS,3-LINK,Detroit Truetrak, Stage 3 clutch

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
f/s: UPR front coilover kit	91emeraldnotch	Suspension	11	11-18-2010 07:22 PM
f/s- upr bumpsteer kit	91emeraldnotch	Suspension	7	01-26-2010 08:02 PM
bump steer to short	mar331	General Mustang Tech	4	07-21-2009 01:38 PM
brand new upr bump steer kit	89gt308	Suspension	0	11-01-2006 02:07 PM